Ore Tube Drier
[Applications]: As we all know, the drum dryer is an important equipment in the mining machinery industry, which can be used to dry large quantities of materials.
[Applicable materials]:
[Applications]: As we all know, the drum dryer is an important equipment in the mining machinery industry, which can be used to dry large quantities of materials.
[Applicable materials]:
1.hav e36 years manufacture experience
2.superior quality but relative low price
3.low cost
Brief introduction of dryer machine
As we all know, the drum dryer is an important equipment in the mining machinery industry, which can be used to dry large quantities of materials. Just for its reliable operation, operating flexibility, adaptability, large process amount these characteristics, the china dryers are widely used in metallurgy, building materials, food, light industry, chemical industry, coal, medicine ore and the other indurtries . the cylinder of dryer is suitable for drying granular materials,we can also use the method of adding materials to dry the stick shaped paste materials or higher water content materials . The advantage of this machine are as following: large production capacity,wide application scale, small flow resistance,large operation allowance range, and easy operation.
Two feeding types of flour dryer
The first adding way is to use the single screw conveyor, we directly use the slime dryer , small hole or damper with gap is installed at the discharge mouth of single screw conveyor, so that the materials can be dispersed into strip type. This adding materials method is applicable to dry the materials whose stickness is small, water content is small and easy to be dried.
The second adding method is applicable to the materials with relative high humidity, larger sticky and difficult to dry. At this time , the first method is not excellent , you need to use double helix predryer. Wet material has become the state of different particle sizes after passing the inlet of the double spiral mixer slime dryer , the contact situation of the hot air and wet material is determined by the butterfly valve control ,so we can control the proportion.
These two above ways are only for reference, according to the actual situation, you can decide which way is the best to use, and then achineve the best production.
| Model(m) | Capacity(t/h) | Main motor | Main gear box | Weight(t) | ||
| Power(kw) | Model | Model | Speed reduction ratio | |||
| Ø1.2*10m | 2.5 | 7.5 | Y160M-R3 | ZL50-16-I | --- | 13.5 |
| Ø1.5*12m | 3.3-4.9 | 10 | Y160L-6-B3 | JZQ500-Ⅲ-2F | --- | 18.9 |
| Ø1.5*15m | 4-6 | 18.5 | Y200L1-6 | JZQ500-Ⅲ-2F | --- | 21 |
| Ø1.8*12m | 4-6 | 18.5 | Y160L-6 | ZQ50-16Ⅱ-2 | 16.46 | 23 |
| Ø2.2*12m | 7-12 | 18.5 | Y200L7-6 | JZQ650-Ⅲ | 31.5 | 38 |
| Ø2.2*14m | 7-12 | 22 | Y200L7-6 | JZQ650-Ⅲ | 31.5 | 40 |
| Ø2.2*16m | 12 | 30 | Y225M-6 | JZQ750-Ⅲ | 31.5 | 45 |
| Ø2.4*14m | 12 | 30 | Y250M-6 | JZQ750-Ⅲ | 31.5 | 51 |
| Ø2.4*18m | 10-13 | 37 | Y250M-6 | ZL85-13-I | 27.16 | 54 |
| Ø2.4*20m | 10-14 | 37 | Y250N-6 | ZL85-13-I | 27.16 | 55 |
| Ø3*20m | 25 | 55 | Y250M-4 |
ZL100-16-I | 41.52 | 78 |
| Ø3*25m | 32-36 | 75 | YR280M-4 | ZL100-16-I | 41.52 | 105 |
