[Applications]: Suitable for washing, grading, purify job processing operations of metallurgy, building materials, water and electricity industries adapted to the fine-grained and coarse-grained materials processing operations, specifically building sand, gravel roads used
[Applicable materials]: Applied to metallurgy, building materials, utilities and other industries washing, grading, purify job
1 Low production costs of processing capacity
2 lean and high multiple effects
3 Simple structure, low failure rate
Sand Washer, which is used for cleaning and washing dust and powder away from the sand, equipped with VSI impact crusher in sand making. It aims at improving the quality of sand. Sand washer drives the impeller in the water groove to move like a circle transmitted by motor and decelerator, and then mixes, overturns, cleans and discharges the sand or slag pellets in the water groove. Sand washing machine is widely applied in the following industries: quarry, minerals, building, transportation, chemical industry, water conservation and hydropower, cement mixture station and so on.
There are two types: XS series and XL series. Let’s learn about them one by one.
XS-series Sand Washer is a bucketed sand washer, mainly used to washing and drying materials. Its novel seal structure and reliable gearing ensure the washing and dewatering effects. It is a high efficient equipment for sand washing coordinated with sand maker ,and is widely used in construction plant, gravel factory, hydropower station, concrete dam sites etc.
Sand washer (stone washing) is high efficiency sand washing equipment, which adopts advanced technology, and combined with the fact of domestic sand industry.
XS series Sand Washer has the features of high cleaning degree, reasonable structure, high output, lower power consumption and fewer sand lost in washing process. The transmission parts of sand washer are isolated from water and sand, which makes the fault rate much lower than that of the sand washer in common use at present.
XL series Sand Washer can wash dust and powder away from the sand. Its novel structure, adjustable overflow dam baffle and reliable arrangement can make sure the result of wash.
XL series Spiral Sand Washer has the features of reasonable structure, convenient maintenance, high output, low power consumption and high degree of cleanness. Its novel sealed structure, totally-enclosed oil-bath transmission system and adjustable overflow slice ensure the characteristics of high efficiency, durability, cleanness, good dehydrating effect and reliable product size.
It has the features of high cleanness, reasonable structure, large output, little sand loss during washing, the most advantageous factor is that the transmission device isolates with sand and water, which greatly reduces the failure rate. It is the perfect equipment for domestic sand washer industry.
Working principle of sand washer
The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task. Characteristics of Sand Washing Machine: Reasonable structure, Large capacity, Low consumption, Little loss of the sand during the washing process, Low failure rate.
| Model |
XS2200
|
XS2600
|
XS2900
|
XS3500
|
| Wheel bucket diameter(mm) |
2200
|
2600
|
2900
|
3500
|
| Rotation speed(r/min) |
1-2
|
1-2
|
0.8-1.5
|
0.8-1.2
|
| Processing capacity(t/h) |
15-30
|
20-50
|
50-100
|
120-200
|
| Motor power(kw) |
4
|
5.5
|
7.5
|
11
|
| Total weight(kg) |
4300
|
5600
|
8100
|
9900
|
| Dimensions (L*W*H) (mm) |
3150*1910*2280
|
3520*2390*2690
|
3820*2640*3200
|
4420*2930*3800
|
